--/*
-- * Copyright (c) 2000-2004 Foundry Networks Inc., All Rights Reserved.
-- */FOUNDRY-WIRELESS-AP-MIB
DEFINITIONS::=BEGINIMPORTSOBJECT-TYPE,NOTIFICATION-TYPE,Integer32,Counter32,TimeTicksFROM SNMPv2-SMI
IpAddress, enterprises FROM RFC1155-SMI
;MacAddress::=OCTETSTRING(SIZE(6))DisplayString::=OCTETSTRINGTruthValue::=INTEGER{ false(2), true(1)}--iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).foundry(1991).products(1).wirelessAp(6).enterpriseAP(1)foundry OBJECTIDENTIFIER::={ enterprises 1991}products OBJECTIDENTIFIER::={ foundry 1}wirelessAp OBJECTIDENTIFIER::={ products 6}enterpriseAp OBJECTIDENTIFIER::={ wirelessAp 1}apSysObjectIds OBJECTIDENTIFIER::={ wirelessAp 2}wirelessApFamily OBJECTIDENTIFIER::={ apSysObjectIds 1}wirelessApSwitch OBJECTIDENTIFIER::={ wirelessApFamily 1}enterpriseApSys OBJECTIDENTIFIER::={ enterpriseAp 1}enterpriseApLineMgnt OBJECTIDENTIFIER::={ enterpriseAp 2}
enterpriseApPortMgnt OBJECTIDENTIFIER::={ enterpriseAp 3}enterpriseApFileTransferMgt OBJECTIDENTIFIER::={ enterpriseAp 4}enterpriseApResetMgt OBJECTIDENTIFIER::={ enterpriseAp 5}enterpriseApIpMgt OBJECTIDENTIFIER::={ enterpriseAp 6}enterpriseAPdot11 OBJECTIDENTIFIER::={ enterpriseAp 7}enterpriseApAdmin OBJECTIDENTIFIER::={ enterpriseAp 8}enterpriseApVLAN OBJECTIDENTIFIER::={ enterpriseAp 9}enterpriseApFilterControl OBJECTIDENTIFIER::={ enterpriseAp 10}enterpriseApSNTP OBJECTIDENTIFIER::={ enterpriseAp 11}enterpriseApDNS OBJECTIDENTIFIER::={ enterpriseAp 12}enterpriseApSyslog OBJECTIDENTIFIER::={ enterpriseAp 13}enterpriseApSecurity OBJECTIDENTIFIER::={ enterpriseAp 14}enterpriseApRadio OBJECTIDENTIFIER::={ enterpriseAp 15}enterpriseApSNMP OBJECTIDENTIFIER::={ enterpriseAp 16}enterpriseApSession OBJECTIDENTIFIER::={ enterpriseAp 17}
enterpriseApIapp OBJECTIDENTIFIER::={ enterpriseAp 18}enterpriseApEventLog OBJECTIDENTIFIER::={ enterpriseAp 19}enterpriseApVapRadio OBJECTIDENTIFIER::={ enterpriseAp 20}-- ****************************************************************************************
-- enterpriseApSys - Standard Mib elements
-- ****************************************************************************************swHardwareVer OBJECT-TYPESYNTAXDisplayString(SIZE(0..20))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Hardware version of the main board."::={ enterpriseApSys 1}swBootRomVer OBJECT-TYPESYNTAXDisplayString(SIZE(0..20))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Boot ROM code version of the main board."::={ enterpriseApSys 2}swOpCodeVer OBJECT-TYPESYNTAXDisplayString(SIZE(0..20))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Operation code version of the main board."::={ enterpriseApSys 3}swSerialNumber OBJECT-TYPESYNTAXDisplayString(SIZE(0..20))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Serial Number of the Access Point."::={ enterpriseApSys 4}swCountryCode OBJECT-TYPESYNTAXDisplayString(SIZE(0..2))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Country code: AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA,
AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS, BE-BELGIUM,
BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI_DARUSSALAM, BG-BULGARIA, CA-CANADA,
CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA_RICA, HR-CROATIA, CY-CYPRUS,
CZ-CZECH_REPUBLIC, DK-DENMARK, DO-DOMINICAN_REPUBLIC, EC-ECUADOR, EG-EGYPT,
EE-ESTONIA, FI-FINLAND, FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA,
HK-HONG_KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA, ID-INDONESIA, IR-IRAN, IE-IRELAND,
IL-ISRAEL, IT-ITALY, JP-JAPAN, JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH KOREA,
KR-KOREA_REPUBLIC, KW-KUWAIT, LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA,
LU-LUXEMBOURG, MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MX-MEXICO, MC-MONACO, MA-MOROCCO,
NL-NETHERLANDS, NZ-NEW_ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN, PA-PANAMA, PE-PERU,
PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO_RICO, QA-QATAR, RO-ROMANIA, RU-RUSSIA,
SA-SAUDI_ARABIA, SG-SINGAPORE, SK-SLOVAK_REPUBLIC, SI-SLOVENIA, ZA-SOUTH_AFRICA,
ES-SPAIN, SE-SWEDEN, CH-SWITZERLAND, SY-SYRIA, TW-TAIWAN, TH-THAILAND, TR-TURKEY,
UA-UKRAINE, AE-UNITED_ARAB_EMIRATES, GB-UNITED_KINGDOM, US-UNITED_STATES, UY-URUGUAY,
VE-VENEZUELA, VN-VIETNAM"::={ enterpriseApSys 5}-- ****************************************
-- anilg:09/22/2003 added for traps
-- ****************************************sysNotificationTree OBJECTIDENTIFIER::={ enterpriseApSys 6}sysNotificationObjects OBJECTIDENTIFIER::={ sysNotificationTree 1}-- no objects for now (but just to keep consistent with the overall system designsysNotifications OBJECTIDENTIFIER::={ sysNotificationTree 2}sysSystemUp NOTIFICATION-TYPE-- OBJECTS { }
STATUScurrentDESCRIPTION"The system up notification shall be sent when the AP
is fully up and running."::={ sysNotifications 1}sysSystemDown NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The system down notification shall be sent before the AP
is about to reboot."::={ sysNotifications 2}sysRadiusServerChanged NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The RADIUS server changed notification shall be sent when
the RADIUS server has changed from Primary / Secondary to
Secondary / Primary."::={ sysNotifications 3}sysConfigFileVersionChanged NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The Config file version changed notification shall be sent when
the version of the AP's configuration file has changed."::={ sysNotifications 4}-- ****************************************************************************************-- ****************************************************************************************
-- enterpriseApLine AP Line elements
-- ****************************************************************************************lineTable OBJECT-TYPESYNTAXSEQUENCEOF LineEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each RS-232 line in this system"::={ enterpriseApLineMgnt 1}lineEntry OBJECT-TYPESYNTAX LineEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration in one RS232 line of the Access Point."INDEX{ lineIndex }::={ lineTable 1}
LineEntry ::=SEQUENCE{
lineIndex Integer32,
lineDataBits Integer32,
lineParity INTEGER,
lineSpeed Integer32,
lineStopBits Integer32}lineIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This is defined as RS-232 index."::={ lineEntry 1}lineDataBits OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is defined as number of data bits for the RS232 interface."::={ lineEntry 2}lineParity OBJECT-TYPESYNTAXINTEGER{none(99),odd(1),even(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is defined as parity of the RS232 interface."::={ lineEntry 3}lineSpeed OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is defined as the speed of the RS-232 interface."::={ lineEntry 4}lineStopBits OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is defined as the number of stop bits for the RS-232 interface."::={ lineEntry 5}-- ****************************************************************************************
-- enterpriseApPortMgnt - Port Mib elements
-- ****************************************************************************************portTable OBJECT-TYPESYNTAXSEQUENCEOF PortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel)."::={ enterpriseApPortMgnt 1}portEntry OBJECT-TYPESYNTAX PortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration in one switch port of the switch."INDEX{ portIndex }::={ portTable 1}
PortEntry ::=SEQUENCE{
portIndex Integer32,
portName DisplayString,
portType INTEGER,
portSpeedDpxCfg INTEGER,
portFlowCtrlCfg INTEGER,
portCapabilities INTEGER,
portAutonegotiation INTEGER,
portSpeedDpxStatus INTEGER,
portFlowCtrlStatus INTEGER}portIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"This is defined as ifIndex in the IF-MIB."::={ portEntry 1}portName OBJECT-TYPESYNTAXDisplayString(SIZE(0..64))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later)."::={ portEntry 2}portType OBJECT-TYPESYNTAXINTEGER{other(1),hundredBaseTX(2),hundredBaseFX(3),thousandBaseSX(4),thousandBaseLX(5),thousandBaseT(6),thousandBaseGBIC(7),thousandBaseMiniGBIC(8)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the port type."::={ portEntry 3}portSpeedDpxCfg OBJECT-TYPESYNTAXINTEGER{auto(1),halfDuplex10(2),fullDuplex10(3),halfDuplex100(4),fullDuplex100(5),
halfDuplex1000(6),fullDuplex1000(7)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."DEFVAL{ halfDuplex10 }::={ portEntry 4}portFlowCtrlCfg OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2),backPressure(3),dot3xFlowControl(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(3) Flow control mechanism is backPressure.
when the port is in fullDuplex mode.This flow control
mechanism will not function.
(4) Flow control mechanism is IEEE 802.3x flow control.
when the port is in halfDuplex mode.This flow control
mechanism will not function.
hundredBaseTX and thousandBaseSX port can be set as:
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4).
hundredBaseFX port can be set as:
enabled(1),
disabled(2),
backPressure(3).
The actual flow control mechanism is used given by
portFlowCtrlStatus."DEFVAL{ enabled }::={ portEntry 5}portCapabilities OBJECT-TYPE-- INTEGER should be bitsSYNTAXINTEGER{portCap10half(99),portCap10full(1),portCap100half(2),portCap100full(3),portCap1000half(4),portCap1000full(5),reserved6(6),reserved7(7),reserved8(8),reserved9(9),reserved10(10),reserved11(11),reserved12(12),reserved13(13),portCapSym(14),
portCapFlowCtrl(15)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Port capabilities."::={ portEntry 6}portAutonegotiation OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Whether autonegotiation is enabled."::={ portEntry 7}portSpeedDpxStatus OBJECT-TYPESYNTAXINTEGER{error(1),halfDuplex10(2),fullDuplex10(3),halfDuplex100(4),fullDuplex100(5),halfDuplex1000(6),fullDuplex1000(7)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1)."::={ portEntry 8}portFlowCtrlStatus OBJECT-TYPESYNTAXINTEGER
{error(1),backPressure(2),dot3xFlowControl(3),none(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1)."::={ portEntry 9}-- ****************************************************************************************
-- enterpriseApTftpMgt - File Transfer Mib elements
-- ****************************************************************************************transferType OBJECT-TYPESYNTAXINTEGER{ftp(1),tftp(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Type of file to transfer."::={ enterpriseApFileTransferMgt 1}fileType OBJECT-TYPESYNTAXINTEGER{application(1),config(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Type of file to transfer."::={ enterpriseApFileTransferMgt 2}srcFile OBJECT-TYPESYNTAXDisplayString(SIZE(0..127))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The source file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified."::={ enterpriseApFileTransferMgt 3}destFile OBJECT-TYPESYNTAXDisplayString(SIZE(0..127))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The destination file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified."::={ enterpriseApFileTransferMgt 4}fileServer OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The IP address of the TFTP server for transfer
when a download is next requested via this MIB.
This value is set to `0.0.0.0' when no IP address has been
specified."::={ enterpriseApFileTransferMgt 5}userName OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The username specified for an FTP Transfer."::={ enterpriseApFileTransferMgt 6}password OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The password specified for an FTP Transfer."
::={ enterpriseApFileTransferMgt 7}status OBJECT-TYPESYNTAXINTEGER{running(1),success(2),failureGeneric(3),flashOpenError(10),flashMallocError(11),flashReadError(12),flashFtypeError(13),socketWriteError(20),protocolError(30)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The status of the transfer."::={ enterpriseApFileTransferMgt 8}transferStart OBJECT-TYPESYNTAXINTEGER{download(1),upload(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Set to go(1) to start a transfer."::={ enterpriseApFileTransferMgt 9}-- ****************************************************************************************
-- enterpriseApResetMgt - Reset Mib elements
-- ****************************************************************************************restartOpCodeFile OBJECT-TYPESYNTAXDisplayString(SIZE(0..127))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Name of op-code file for start-up."
::={ enterpriseApResetMgt 1}restartControl OBJECT-TYPESYNTAXINTEGER{running(1),warmBoot(2),coldBoot(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Setting this object to warmBoot(2) causes the device to
restart the application software with current configuration
parameters saved in non-volatile memory. Setting this
object to coldBoot(3) causes the device to reinitialize
configuration parameters in non-volatile memory to default
values and restart the application software. When the device
is running normally, this variable has a value of running(1)."::={ enterpriseApResetMgt 2}-- ****************************************************************************************
-- enterpriseApIpMgnt - Ip Mib elements
-- ****************************************************************************************netConfigIPAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use DHCP to try to figure out what these
values should be. If DHCP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."::={ enterpriseApIpMgt 1}netConfigSubnetMask OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use DHCP to try to figure out what these
values should be. If DHCP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."::={ enterpriseApIpMgt 2}netConfigDefaultGateway OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0."::={ enterpriseApIpMgt 3}netConfigHttpState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Whether HTTP is enabled."::={ enterpriseApIpMgt 4}netConfigHttpPort OBJECT-TYPESYNTAXINTEGER(514..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The port number for HTTP."::={ enterpriseApIpMgt 5}netConfigHttpsState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Whether Secure HTTP is enabled."::={ enterpriseApIpMgt 6}netConfigHttpsPort OBJECT-TYPE
SYNTAXINTEGER(514..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The port number for Secure HTTP."::={ enterpriseApIpMgt 7}netConfigDHCPState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Whether DHCP is enabled."::={ enterpriseApIpMgt 8}-- ****************************************************************************************
-- enterpriseAPdot11 - 802.11 MIB elements
-- ****************************************************************************************dot11AuthenticationEntry OBJECTIDENTIFIER::={ enterpriseAPdot11 1}dot118021xState OBJECT-TYPESYNTAXINTEGER{disabled(0),supported(1),required(2)}MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"This attribute indicates that the Enterprise the state
of the 802.1x authentication algorithm."::={ dot11AuthenticationEntry 1}dot118021xBroadcastKeyRefreshRate OBJECT-TYPESYNTAXINTEGER(0..1440)MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION
"The number (in minutes) between changing the broadcast key for
802.1x and WPA clients"::={ dot11AuthenticationEntry 2}dot118021xSessionKeyRefreshRate OBJECT-TYPESYNTAXINTEGER(0..1440)MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"The number (in minutes) between changing session keys for
802.1x and WPA clients"::={ dot11AuthenticationEntry 3}dot118021xReauthenticationTimeout OBJECT-TYPESYNTAXINTEGER(0..1440)MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"The number (in minutes) between forcing 802.1x clients to
reauthenticate"::={ dot11AuthenticationEntry 4}dot11MACAuthenticationType OBJECT-TYPESYNTAXINTEGER{disabled(0),local(1),radius(2)}MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"This value indicates the type of mac authentication in use."::={ dot11AuthenticationEntry 5}-- **********************************************************************
-- * End of dot11Authentication TABLE
-- **********************************************************************-- **********************************************************************
-- * dot11AuthenticationServer TABLE
-- **********************************************************************dot11AuthenticationServerTable OBJECT-TYPESYNTAXSEQUENCEOF Dot11AuthenticationServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each authentication server."::={ enterpriseAPdot11 2}dot11AuthenticationServerEntry OBJECT-TYPESYNTAX Dot11AuthenticationServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one authentication server of the AP."INDEX{ dot11AuthenticationServerIndex }::={ dot11AuthenticationServerTable 1}
Dot11AuthenticationServerEntry ::=SEQUENCE{
dot11AuthenticationServerIndex Integer32,
dot11AuthenticationServer IpAddress,
dot11AuthenticationPort INTEGER,
dot11AuthenticationKey DisplayString,
dot11AuthenticationRetransmit INTEGER,
dot11AuthenticationTimeout INTEGER,
dot11AuthenticationAcctPort INTEGER,
dot11AuthenticationInterimUpdate INTEGER,
dot11AuthenticationVlanIdFormat INTEGER}dot11AuthenticationServerIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index of the Authentication Server"::={ dot11AuthenticationServerEntry 1}dot11AuthenticationServer OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the IP address of the authentication server."::={ dot11AuthenticationServerEntry 2}dot11AuthenticationPort OBJECT-TYPESYNTAXINTEGER(1024..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the UDP Port used by the authentication server."::={ dot11AuthenticationServerEntry 3}dot11AuthenticationKey OBJECT-TYPESYNTAXDisplayString(SIZE(0..20))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the shared key used by the authentication server."::={ dot11AuthenticationServerEntry 4}dot11AuthenticationRetransmit OBJECT-TYPESYNTAXINTEGER(1..30)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the retransmit timer length used by the
authentication server."::={ dot11AuthenticationServerEntry 5}dot11AuthenticationTimeout OBJECT-TYPESYNTAXINTEGER(1..60)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the Timeout value(sec) used by the
authentication server."::={ dot11AuthenticationServerEntry 6}dot11AuthenticationAcctPort OBJECT-TYPESYNTAXINTEGER(1024..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The port number for radius server accounting."
::={ dot11AuthenticationServerEntry 7}dot11AuthenticationInterimUpdate OBJECT-TYPESYNTAXINTEGER(60..86400)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the Timeout value(sec) used by the
radius server interim update."::={ dot11AuthenticationServerEntry 8}dot11AuthenticationVlanIdFormat OBJECT-TYPESYNTAXINTEGER{hex(1),ascii(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the valn id format."::={ dot11AuthenticationServerEntry 9}-- **********************************************************************
-- * End of dot11AuthenticationServer TABLE
-- **********************************************************************-- **********************************************************************
-- * dot11FilteringTable TABLE
-- **********************************************************************dot11Filter OBJECTIDENTIFIER::={ enterpriseAPdot11 3}dot11FilterDefault OBJECT-TYPESYNTAXINTEGER{allow(1),deny(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the default access for local mac filters."::={ dot11Filter 1}dot11FilterTable OBJECT-TYPE
SYNTAXSEQUENCEOF Dot11FilterEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of status information about
each configured MAC Address Filtering Entry."::={ dot11Filter 2}dot11FilterEntry OBJECT-TYPESYNTAX Dot11FilterEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration in one radio of the AP."INDEX{ dot11FilterAddress }::={ dot11FilterTable 1}
Dot11FilterEntry ::=SEQUENCE{
dot11FilterAddress MacAddress,
dot11FilterStatus INTEGER}dot11FilterAddress OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This value indicates the MAC address of the
filter entry."::={ dot11FilterEntry 1}dot11FilterStatus OBJECT-TYPESYNTAXINTEGER{allowed(30),denied(31),delete(32)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client."::={ dot11FilterEntry 2}-- *********************************************************
-- anilg: 09/22/03 :notifications used for dot11 management
-- *********************************************************dot11NotificationTree OBJECTIDENTIFIER::={ enterpriseAPdot11 4}dot11NotificationObjects OBJECTIDENTIFIER::={ dot11NotificationTree 1}dot11MacAddr OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Mac Address of the affected interface, returned with traps only."::={ dot11NotificationObjects 1}dot11Station OBJECT-TYPESYNTAXMacAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute holds the MAC address of the wireless station"::={ dot11NotificationObjects 2}dot11RequestType OBJECT-TYPESYNTAXINTEGER{unknown(1),association(2),reAssociation(3),authentication(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute defines the request type sent by the station.
Value = 1: Unknown request type
Value = 2: Association Request
Value = 3: Re-association Request
Value = 4: Authentication"::={ dot11NotificationObjects 3}dot11ReasonCode OBJECT-TYPESYNTAXINTEGER{invalidModeOrState(1),unAuthenticatedStation(2),
internalError(3),outOfSequenceFrame(4),unsupportedAlgorithm(5),invalidFrameLngth(6),wepRequiredOnAP(7),wepNotAllowed(8),challengeTextMismatch(9)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute defines the reason for the failure of an operation.
Value = 1: Invalid mode/state
Value = 2: Station not authenticated.
Value = 3: Internal error
Value = 4: Out of sequence frame
Value = 5: Un-supportd algorithm
Value = 6: Invalid frame length
Value = 7: WEP is required on the AP
Value = 8: WEP not allowed
Value = 9: Challenge text mismatch"::={ dot11NotificationObjects 4}dot11ApIpAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This value indicates the IP address of the Access Point"::={ dot11NotificationObjects 5}dot1xAuthenticatorMacAddr OBJECT-TYPESYNTAXMacAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute holds the MAC address of the authenticator for the AP."::={ dot11NotificationObjects 6}externalAntennaStatus OBJECT-TYPESYNTAXINTEGER{attached(1),
detached(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This attribute tells whether the external antenna is
attached or detached."::={ dot11NotificationObjects 7}apRadio OBJECT-TYPESYNTAXINTEGER{radioA(1),radioBg(2)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This attribute tells what radio the notification
occurred on."::={ dot11NotificationObjects 8}apVap OBJECT-TYPESYNTAXINTEGER(0..3)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This attribute tells what Vap the notification
occurred on."::={ dot11NotificationObjects 9}dot11Notifications OBJECTIDENTIFIER::={ dot11NotificationTree 2}dot11StationAssociation NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The associate notification shall be sent when a station successfully
associates with the Access Point. The value of the notification shall
include the MAC address of the station that has associated."::={ dot11Notifications 1}dot11StationReAssociation NOTIFICATION-TYPE
OBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The re-associate notification shall be sent when a station
successfully re-associates with the Access Point. The value of the
notification shall include the MAC address of the station
that has associated."::={ dot11Notifications 2}dot11StationAuthentication NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The authentication notification shall be sent when a station
successfully authenticates with the Access Point. The value of the
notification shall include the MAC address of the station
that has authenticated."::={ dot11Notifications 3}-- Note that the following is different from the standard 802.11 mib dot11AuthenticateFail Notification
-- This one also has a reason code within the trap.dot11StationRequestFail NOTIFICATION-TYPEOBJECTS{ dot11Station, dot11RequestType, dot11ReasonCode }STATUScurrentDESCRIPTION"The station request fail shall be sent out when a station
fails to associate / re-associate / authenticate with the
Access Point. The notification shall include the MAC address
of the station and the reason code for the failure."::={ dot11Notifications 4}dot11InterfaceBFail NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The InterfaceBFail notification shall be sent out when
802.11b wireless interface has failed."::={ dot11Notifications 5}dot11InterfaceAGFail NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The InterfaceAGFail notification shall be sent out when
802.11a/802.11g wireless interface has failed."::={ dot11Notifications 6}
dot1xMacAddrAuthSuccess NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The 802.1x MAC address authentication success notification shall
be sent when a station successfully authenticates the MAC address
with the RADIUS server. The value of the notification shall
include the MAC address of the station that has authenticated."::={ dot11Notifications 7}dot1xMacAddrAuthFail NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The 802.1x MAC address authentication failure notification shall
be sent when a station fails to authenticate the MAC address
with the RADIUS server. The value of the notification shall
include the MAC address of the station that failed to authenticate."::={ dot11Notifications 8}dot1xAuthNotInitiated NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The 802.1x authentication not initiated notification shall
be sent when a station did not initiate 802.1x authentication
with the RADIUS server. The value of the notification shall
include the MAC address of the station that did not initiate
802.1x authentication."::={ dot11Notifications 9}dot1xAuthSuccess NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The 802.1x authentication success notification shall
be sent when a station successfully authenticates with the
RADIUS server. The value of the notification shall include
the MAC address of the station that has authenticated."::={ dot11Notifications 10}dot1xAuthFail NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION
"The 802.1x authentication failure notification shall
be sent when a station fails to authenticate with the
RADIUS server. The value of the notification shall include
the MAC address of the station that failed to authenticate."::={ dot11Notifications 11}localMacAddrAuthSuccess NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The Local MAC address authentication success notification shall
be sent when a station successfully authenticates the MAC address
with the database stored locally within the AP. The value of the
notification shall include the MAC address of the station that
has authenticated."::={ dot11Notifications 12}localMacAddrAuthFail NOTIFICATION-TYPEOBJECTS{ dot11Station }STATUScurrentDESCRIPTION"The Local MAC address authentication failure notification shall
be sent when a station fails to authenticate the MAC address
with the database stored locally within the AP. The value of the
notification shall include the MAC address of the station that
has authenticated."::={ dot11Notifications 13}pppLogonFail NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The PPP Logon failure notification shall be sent out when
the AP fails to login successfully to the PPP peer using the
supplied username and password."::={ dot11Notifications 14}iappStationRoamedFrom NOTIFICATION-TYPEOBJECTS{ dot11Station, dot11ApIpAddress}STATUScurrentDESCRIPTION"The IAPP Station Roamed-From Notification shall be sent out
whenever a station roams from another Access Point (AP) to
this AP. The notification shall include the MAC address of
the station and the IP address of the old AP."::={ dot11Notifications 15}
iappStationRoamedTo NOTIFICATION-TYPEOBJECTS{ dot11Station, dot11ApIpAddress}STATUScurrentDESCRIPTION"The IAPP Station Roamed-To Notification shall be sent out
whenever a station roams to another Access Point (AP) from
this AP. The notification shall include the MAC address of
the station and the IP address of the new AP."::={ dot11Notifications 16}iappContextDataSent NOTIFICATION-TYPEOBJECTS{ dot11Station, dot11ApIpAddress}STATUScurrentDESCRIPTION"The IAPP Context Data Sent notification shall be sent out
whenever the context data for a station has been sent to
the new AP with which the station has associated. The
notification shall include the MAC address of
the station and the IP address of the new AP."::={ dot11Notifications 17}dot1xSupplicantAuthenticated NOTIFICATION-TYPEOBJECTS{ dot1xAuthenticatorMacAddr }STATUScurrentDESCRIPTION"The notification shall be sent when the AP has successfully authenticated
with the switch. The value of the notification shall include the MAC
address of the switch (authenticator) that the AP has authenticated with."::={ dot11Notifications 18}wirelessExternalAntenna NOTIFICATION-TYPEOBJECTS{ externalAntennaStatus }STATUScurrentDESCRIPTION"The notification shall be sent when the external antenna has
been attached or detached from the wireless 11g interface."::={ dot11Notifications 19}micFail NOTIFICATION-TYPEOBJECTS{ dot1xAuthenticatorMacAddr }STATUScurrentDESCRIPTION"The notification shall be sent when the AP has detected MIC failures."::={ dot11Notifications 20}seqErr NOTIFICATION-TYPEOBJECTS{ dot1xAuthenticatorMacAddr }STATUScurrentDESCRIPTION"The notification shall be sent when the AP has detected replay attack."::={ dot11Notifications 21}-- ****************************************************************************************
-- dot11AuthenticationSupplicantTable
-- ****************************************************************************************dot11AuthenticationSupplicantTable OBJECT-TYPESYNTAXSEQUENCEOF Dot11AuthenticationSupplicantEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of supplicant"::={ enterpriseAPdot11 5}dot11AuthenticationSupplicantEntry OBJECT-TYPESYNTAX Dot11AuthenticationSupplicantEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one supplicant."INDEX{ dot118021xSuppIndex }::={ dot11AuthenticationSupplicantTable 1}
Dot11AuthenticationSupplicantEntry ::=SEQUENCE{
dot118021xSuppIndex Integer32,
dot118021xSuppState INTEGER,
dot118021xSuppUser DisplayString,
dot118021xSuppPasswd DisplayString}dot118021xSuppIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index of the interface for which this supplicant is
running. Currently only the ethernet interface."
::={ dot11AuthenticationSupplicantEntry 1}dot118021xSuppState OBJECT-TYPESYNTAXINTEGER{disabled(0),enabled(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to enable or disable the 802.1x supplicant."::={ dot11AuthenticationSupplicantEntry 2}dot118021xSuppUser OBJECT-TYPESYNTAXDisplayString(SIZE(1..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the username for supplicant. If value is
configured, will display ****. Else will display EMPTY."::={ dot11AuthenticationSupplicantEntry 3}dot118021xSuppPasswd OBJECT-TYPESYNTAXDisplayString(SIZE(1..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the password for supplicant. If value is
configured, will display ****. Else will display EMPTY."::={ dot11AuthenticationSupplicantEntry 4}-- **********************************************************************
-- * dot11VapAuthenticationEntry TABLE
-- **********************************************************************dot11VapAuthenticationTable OBJECT-TYPESYNTAXSEQUENCEOF Dot11VapAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of 8021x for each Vap."::={ enterpriseAPdot11 6}dot11VapAuthenticationEntry OBJECT-TYPESYNTAX Dot11VapAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of 8021x for each Vap of the AP."INDEX{ dot11Vap8021xIndex }::={ dot11VapAuthenticationTable 1}
Dot11VapAuthenticationEntry ::=SEQUENCE{
dot11Vap8021xIndex Integer32,
dot11Vap8021xState INTEGER,
dot11Vap8021xBroadcastKeyRefreshRate INTEGER,
dot11Vap8021xSessionKeyRefreshRate INTEGER,
dot11Vap8021xReauthenticationTimeout INTEGER}dot11Vap8021xIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index for configuration."::={ dot11VapAuthenticationEntry 1}dot11Vap8021xState OBJECT-TYPESYNTAXINTEGER{disabled(0),supported(1),required(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This attribute indicates that the Enterprise the state
of the 802.1x authentication algorithm."::={ dot11VapAuthenticationEntry 2}dot11Vap8021xBroadcastKeyRefreshRate OBJECT-TYPESYNTAXINTEGER(0..1440)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The number (in minutes) between changing the broadcast key for
802.1x and WPA clients"::={ dot11VapAuthenticationEntry 3}dot11Vap8021xSessionKeyRefreshRate OBJECT-TYPESYNTAXINTEGER(0..1440)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The number (in minutes) between changing session keys for
802.1x and WPA clients"::={ dot11VapAuthenticationEntry 4}dot11Vap8021xReauthenticationTimeout OBJECT-TYPESYNTAXINTEGER(0..1440)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The number (in minutes) between forcing 802.1x clients to
reauthenticate"::={ dot11VapAuthenticationEntry 5}-- **********************************************************************
-- * End of dot11VapAuthentication TABLE
-- **********************************************************************-- ****************************************************************************************
-- enterpriseApAdmin - Admin Mib elements
-- ****************************************************************************************enterpriseApAdminUser OBJECT-TYPESYNTAXDisplayString(SIZE(0..16))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the username for management login."::={ enterpriseApAdmin 1}enterpriseApAdminPassword OBJECT-TYPESYNTAXDisplayString(SIZE(0..16))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the password for management login."::={ enterpriseApAdmin 2}-- ****************************************************************************************
-- enterpriseApVLAN - VLAN Mib elements
-- ****************************************************************************************enterpriseApVLANNativeId OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the native VLAN id."::={ enterpriseApVLAN 1}enterpriseApVLANState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether VLANs are enabled or disabled."::={ enterpriseApVLAN 2}enterpriseApNativeVlanTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApNativeVlanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table used to manage the Vlans for each
wireless interface."::={ enterpriseApVLAN 3}enterpriseApNativeVlanEntry OBJECT-TYPESYNTAX EnterpriseApNativeVlanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about vlan configuration of one wireless interface."INDEX{ nativeVlanIfIndex,
nativeVlanSsidNumber }::={ enterpriseApNativeVlanTable 1}
EnterpriseApNativeVlanEntry ::=SEQUENCE{
nativeVlanIfIndex Integer32,
nativeVlanSsidNumber Integer32,
nativeVlanVlanId Integer32}nativeVlanIfIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Interface Index of the wireless interface for which
the vlan is assigned to."::={ enterpriseApNativeVlanEntry 1}nativeVlanSsidNumber OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Associated Number for Service Set Id (SSID) of the
wireless interface for which the vlan is assigned to.
Note: This is for future support of multiple SSIDs
per radio interface."::={ enterpriseApNativeVlanEntry 2}nativeVlanVlanId OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the native VLAN id of the wireless interface associated
with the if index and the SSID number(if it is not 0)."::={ enterpriseApNativeVlanEntry 3}-- ****************************************************************************************
-- enterpriseApFilterControl - Filter Control Mib elements
-- ****************************************************************************************enterpriseApFilterControlBridge OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)
}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the local bridge filter setting."::={ enterpriseApFilterControl 1}enterpriseApFilterControlAPManage OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the AP management filter setting."::={ enterpriseApFilterControl 2}enterpriseApFilterControlEthernet OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the ethernet filter setting."::={ enterpriseApFilterControl 3}enterpriseApFilterProtocolTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApFilterProtocolEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of the filter protocol table."::={ enterpriseApFilterControl 4}enterpriseApFilterProtocolEntry OBJECT-TYPESYNTAX EnterpriseApFilterProtocolEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the filter protocol table, containing information
about configuration of one filter table entry."INDEX{ enterpriseApFilterProtocolIndex }::={ enterpriseApFilterProtocolTable 1}
EnterpriseApFilterProtocolEntry ::=SEQUENCE{
enterpriseApFilterProtocolIndex Integer32,
enterpriseApFilterProtocolName DisplayString,
enterpriseApFilterProtocolISODesignator DisplayString,
enterpriseApFilterProtocolState INTEGER}enterpriseApFilterProtocolIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index of the Protocol Filters."::={ enterpriseApFilterProtocolEntry 1}enterpriseApFilterProtocolName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This value indicates the name of the protocol filter. One of
the following:
Airfortress, Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation,
CDP, Cranite, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL,
Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new),
Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3
"::={ enterpriseApFilterProtocolEntry 2}enterpriseApFilterProtocolISODesignator OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This value indicates the name of the protocol filter."::={ enterpriseApFilterProtocolEntry 3}enterpriseApFilterProtocolState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2),
managementonly(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the protocol filter is enabled
and if enabled if it is for management only."::={ enterpriseApFilterProtocolEntry 4}enterpriseApDynamicFilterProtocolTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApDynamicFilterProtocolEntry
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of the dynamic filter protocol table."::={ enterpriseApFilterControl 5}enterpriseApDynamicFilterProtocolEntry OBJECT-TYPESYNTAX EnterpriseApDynamicFilterProtocolEntry
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An entry in the filter dynamic protocol table, containing information
about configuration of one dynamic filter table entry."INDEX{ enterpriseApDynamicFilterProtocolIndex }::={ enterpriseApDynamicFilterProtocolTable 1}
EnterpriseApDynamicFilterProtocolEntry ::=SEQUENCE{
enterpriseApDynamicFilterProtocolIndex Integer32,
enterpriseApDynamicFilterProtocolName DisplayString,
enterpriseApDynamicFilterProtocolISODesignator DisplayString,
enterpriseApDynamicFilterProtocolState INTEGER}enterpriseApDynamicFilterProtocolIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Index of the Dynamic Protocol Filters."::={ enterpriseApDynamicFilterProtocolEntry 1}
enterpriseApDynamicFilterProtocolName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the name of the dynamic protocol filter."::={ enterpriseApDynamicFilterProtocolEntry 2}enterpriseApDynamicFilterProtocolISODesignator OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value is the ISO Designator for the protocol in ascii hex format."::={ enterpriseApDynamicFilterProtocolEntry 3}enterpriseApDynamicFilterProtocolState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2),managementonly(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dynamic protocol filter is enabled."::={ enterpriseApDynamicFilterProtocolEntry 4}-- ****************************************************************************************
-- enterpriseApSNTP - SNTP Mib elements
-- ****************************************************************************************enterpriseApSNTPState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether SNTP is enabled or not. At least one of the
SNTP servers must have a valid IP address before SNTP can be enabled."::={ enterpriseApSNTP 1}
enterpriseApSNTPPrimaryServer OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the IP address of the primary SNTP server."::={ enterpriseApSNTP 2}enterpriseApSNTPSecondaryServer OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the IP address of the secondary SNTP server."::={ enterpriseApSNTP 3}enterpriseApSNTPTimezone OBJECT-TYPESYNTAXINTEGER{enewetakKwajalein(0),midwayIsland(1),hawaii(2),alaska(3),pacific(4),arizona(5),mountain(6),central(7),mexicoCity(8),saskatchewan(9),bogota(10),eastern(11),indiana(12),atlantic(13),
caracas(14),santiago(15),newfoundland(16),brasilia(17),buenos(18),midAtlantic(19),azores(20),casablanca(21),greenwichMeanTimeDublin(22),greenwichMeanTimeLisbon(23),amsterdam(24),stockhoim(25),bratislava(26),prague(27),paris(28),sofija(29),athens(30),bucharest(31),cairo(32),harare(33),helsinki(34),israel(35),baghdad(36),moscow(37),tehran(38),
abuDhabi(39),vogograd(40),islamabad(41),almaty(42),bangkok(43),beijing(44),taipei(45),tokyo(46),brisbane(47),canberra(48),guam(49),hobart(50),magadan(51),fiji(52),wellington(53)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates which timezone to use."::={ enterpriseApSNTP 4}enterpriseApSNTPDST OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether Daylight Savings Time is enabled or not."::={ enterpriseApSNTP 5}
enterpriseApSNTPDSTStartMonth OBJECT-TYPESYNTAXINTEGER(1..12)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the starting month for Daylight Savings Time."::={ enterpriseApSNTP 6}enterpriseApSNTPDSTStartDay OBJECT-TYPESYNTAXINTEGER(1..31)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the starting day for Daylight Savings Time."::={ enterpriseApSNTP 7}enterpriseApSNTPDSTEndMonth OBJECT-TYPESYNTAXINTEGER(1..12)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the ending month for Daylight Savings Time."::={ enterpriseApSNTP 8}enterpriseApSNTPDSTEndDay OBJECT-TYPESYNTAXINTEGER(1..31)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the ending day for Daylight Savings Time."::={ enterpriseApSNTP 9}-- ****************************************
-- anilg:09/19/2003 added for traps
-- ****************************************sntpNotificationTree OBJECTIDENTIFIER::={ enterpriseApSNTP 10}sntpNotificationObjects OBJECTIDENTIFIER::={ sntpNotificationTree 1}
-- no objects for now (but just to keep consistent with the overall system designsntpNotifications OBJECTIDENTIFIER::={ sntpNotificationTree 2}sntpServerFail NOTIFICATION-TYPE-- OBJECTS { }STATUScurrentDESCRIPTION"The sntpServerFail notification shall be sent when the AP
fails to get time from the configured SNTP server."::={ sntpNotifications 1}-- ****************************************************************************************
-- enterpriseApDNS - DNS Mib elements
-- ****************************************************************************************enterpriseApDNSPrimaryServer OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the IP address of the primary DNS server."::={ enterpriseApDNS 1}enterpriseApDNSSecondaryServer OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the IP address of the secondary DNS server."::={ enterpriseApDNS 2}-- ****************************************************************************************
-- enterpriseApSyslog - Syslog Mib elements
-- ****************************************************************************************enterpriseApSyslogState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether syslog is enabled."::={ enterpriseApSyslog 1}
enterpriseApSyslogConsoleState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether syslog console logging is enabled."::={ enterpriseApSyslog 2}enterpriseApSyslogLevel OBJECT-TYPESYNTAXINTEGER{emergency(0),alert(1),critical(2),error(3),warning(4),notice(5),info(6),debug(7)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the syslog logging level."::={ enterpriseApSyslog 3}-- **********************************************************************
-- * EnterpriseApSyslogServer TABLE
-- **********************************************************************enterpriseApSyslogServerTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApSyslogServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each syslog server."::={ enterpriseApSyslog 4}enterpriseApSyslogServerEntry OBJECT-TYPE
SYNTAX EnterpriseApSyslogServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one syslog server of the AP."INDEX{ enterpriseApSyslogServerIndex }::={ enterpriseApSyslogServerTable 1}
EnterpriseApSyslogServerEntry ::=SEQUENCE{
enterpriseApSyslogServerIndex Integer32,
enterpriseApSyslogServerState INTEGER,
enterpriseApSyslogServerIPAddress IpAddress,
enterpriseApSyslogServerPort INTEGER}enterpriseApSyslogServerIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index of the Syslog Server"::={ enterpriseApSyslogServerEntry 1}enterpriseApSyslogServerState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the syslog server is enabled."::={ enterpriseApSyslogServerEntry 2}enterpriseApSyslogServerIPAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the IP address of the syslog server."::={ enterpriseApSyslogServerEntry 3}enterpriseApSyslogServerPort OBJECT-TYPESYNTAXINTEGER(1024..65535)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the UDP Port used by the syslog server."::={ enterpriseApSyslogServerEntry 4}-- **********************************************************************
-- * EnterpriseApSecurity TABLE
-- **********************************************************************enterpriseApSecurityTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApSecurityEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each radio in terms of security settings."::={ enterpriseApSecurity 1}enterpriseApSecurityEntry OBJECT-TYPESYNTAX EnterpriseApSecurityEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one radio of the AP."INDEX{ enterpriseApSecurityIndex }::={ enterpriseApSecurityTable 1}
EnterpriseApSecurityEntry ::=SEQUENCE{
enterpriseApSecurityIndex Integer32,
enterpriseApSecurityAuthType INTEGER,
enterpriseApSecuritySharedKeyLen INTEGER,
enterpriseApSecurityWPAMode INTEGER,
enterpriseApSecurityWPAKeyType INTEGER,
enterpriseApSecurityWPACipher INTEGER,
enterpriseApSecurityWPAPSKType INTEGER,
enterpriseApSecurityWPAPSK DisplayString,
enterpriseApSecurityWEPKeyType INTEGER,
enterpriseApSecurityWEPEnabled TruthValue}enterpriseApSecurityIndex OBJECT-TYPESYNTAXInteger32
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Radio Index for security settings."::={ enterpriseApSecurityEntry 1}enterpriseApSecurityAuthType OBJECT-TYPESYNTAXINTEGER{open(0),shared(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the type of authentication in use for this radio interface."::={ enterpriseApSecurityEntry 2}enterpriseApSecuritySharedKeyLen OBJECT-TYPESYNTAXINTEGER{none(0),sixtyFour(1),oneHundredTwentyEight(2),oneHundredFiftyTwo(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the shared key length for this radio interface."::={ enterpriseApSecurityEntry 3}enterpriseApSecurityWPAMode OBJECT-TYPESYNTAXINTEGER{supported(0),required(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the state of WPA for this radio interface.
Supported(0) means either WEP or WPA clients are allowed,
required (1) means only WPA clients are allowed and
disabled(2) means only WEP clients are allowed."::={ enterpriseApSecurityEntry 4}enterpriseApSecurityWPAKeyType OBJECT-TYPESYNTAXINTEGER{dot1x(0),presharedkey(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the type of WPA Key Management in use for this radio interface."::={ enterpriseApSecurityEntry 5}enterpriseApSecurityWPACipher OBJECT-TYPESYNTAXINTEGER{wep(0),tkip(1),aes(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the type of WPA Cipher in use for this radio interface."::={ enterpriseApSecurityEntry 6}enterpriseApSecurityWPAPSKType OBJECT-TYPESYNTAXINTEGER{hex(0),alphanumeric(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the type of WPA Pre Shared Key in use for this radio interface."::={ enterpriseApSecurityEntry 7}enterpriseApSecurityWPAPSK OBJECT-TYPESYNTAXDisplayString(SIZE(0..80))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates WPA Pre Shared Key in use for this radio interface."::={ enterpriseApSecurityEntry 8}enterpriseApSecurityWEPKeyType OBJECT-TYPESYNTAXINTEGER{hexadecimal(0),alphanumeric(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the type of WEP Key in use for this radio interface."::={ enterpriseApSecurityEntry 9}enterpriseApSecurityWEPEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether WEP is enabled."::={ enterpriseApSecurityEntry 10}enterpriseApSsh OBJECTIDENTIFIER::={ enterpriseApSecurity 2}enterpriseApSshServerEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether SSH server is enabled."::={ enterpriseApSsh 1}enterpriseApSshServerPort OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates SSH server's port number."DEFVAL{22}
::={ enterpriseApSsh 2}enterpriseApSshTelnetServerEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether telnet server is enabled."::={ enterpriseApSsh 3}-- **********************************************************************
-- * EnterpriseApRadio TABLE
-- **********************************************************************enterpriseApRadioTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApRadioEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each radio."::={ enterpriseApRadio 1}enterpriseApRadioEntry OBJECT-TYPESYNTAX EnterpriseApRadioEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one radio of the AP."INDEX{ enterpriseApRadioIndex }::={ enterpriseApRadioTable 1}
EnterpriseApRadioEntry ::=SEQUENCE{
enterpriseApRadioIndex Integer32,
enterpriseApRadioState INTEGER,
enterpriseApRadioAutoChannel INTEGER,
enterpriseApRadioTransmitPower INTEGER,
enterpriseApRadioClosedSystem INTEGER,
enterpriseApRadioMaxAssoc INTEGER,
enterpriseApRadioTransmitKey INTEGER,
enterpriseApRadioTurboMode INTEGER,
enterpriseApRadioDescription DisplayString,
enterpriseApRadioDataRate INTEGER,
enterpriseApRadioGMode INTEGER,
enterpriseApRadioAntennaMode INTEGER,
enterpriseApRadioAntennaType INTEGER,
enterpriseApRadioAntennaDiversity INTEGER,
enterpriseApRadioAntennaLocation INTEGER}enterpriseApRadioIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Radio Index for configuration."::={ enterpriseApRadioEntry 1}enterpriseApRadioState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the state of the radio interface."::={ enterpriseApRadioEntry 2}enterpriseApRadioAutoChannel OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether auto channel selection is enabled or not
for this radio interface"::={ enterpriseApRadioEntry 3}enterpriseApRadioTransmitPower OBJECT-TYPESYNTAXINTEGER{min(0),eighth(1),quarter(2),half(3),
full(4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the transmit power for this radio interface."::={ enterpriseApRadioEntry 4}enterpriseApRadioClosedSystem OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether closed system is enabled for this radio interface."::={ enterpriseApRadioEntry 5}enterpriseApRadioMaxAssoc OBJECT-TYPESYNTAXINTEGER(1..64)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the max number of clients allowed on this radio interface."::={ enterpriseApRadioEntry 6}enterpriseApRadioTransmitKey OBJECT-TYPESYNTAXINTEGER(1..4)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates default transmit key in use for this radio interface."::={ enterpriseApRadioEntry 7}enterpriseApRadioTurboMode OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)
}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether turbo mode is enabled for this radio interface."::={ enterpriseApRadioEntry 8}enterpriseApRadioDescription OBJECT-TYPESYNTAXDisplayString(SIZE(0..80))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the description for this radio interface."::={ enterpriseApRadioEntry 9}enterpriseApRadioDataRate OBJECT-TYPESYNTAXINTEGER{oneMbps(1),twoMbps(2),fiveAndHalfMbps(5),sixMbps(6),nineMbps(9),elevenMbps(11),twelveMbps(12),eighteenMbps(18),twentyFourMbps(24),thirtySixMbps(36),fourtyEightMbps(48),fiftyFourMbps(54),auto(255)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The auto
setting will attempt to set the best data rate for the interface"::={ enterpriseApRadioEntry 10}enterpriseApRadioGMode OBJECT-TYPESYNTAXINTEGER{bOnly(1),gOnly(2),bg(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the radio mode for the 802.11g radio.
This setting is only valid for the 802.11g interface."::={ enterpriseApRadioEntry 11}enterpriseApRadioAntennaMode OBJECT-TYPESYNTAXINTEGER{unknown(0),fixed(1),external(2)}MAX-ACCESSread-writeSTATUSobsoleteDESCRIPTION"This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
fixed(1) means use both built-in antennas,
external(2) means use one external antenna on the right side.
This setting is only valid for the 802.11g interface."::={ enterpriseApRadioEntry 12}enterpriseApRadioAntennaType OBJECT-TYPESYNTAXINTEGER{integrated(0),foundryExternal3dbi(256),foundryExternal9dbi(257)}MAX-ACCESSread-write
STATUScurrentDESCRIPTION"This value indicates the type of antenna that can be attached."::={ enterpriseApRadioEntry 13}enterpriseApRadioAntennaDiversity OBJECT-TYPESYNTAXINTEGER{unknown(0),full(1),fixedA(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the antenna will transmit from
both sides (full) or the right side-same side as LED (fixedA)."::={ enterpriseApRadioEntry 14}enterpriseApRadioAntennaLocation OBJECT-TYPESYNTAXINTEGER{indoor(1),outdoor(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates where the antenna will be located and
affects which channels are available."::={ enterpriseApRadioEntry 15}-- **********************************************************************
-- * EnterpriseApRadio TABLE
-- **********************************************************************-- ****************************************************************************************
-- enterpriseApSNMP - SNMP MIB
-- ****************************************************************************************enterpriseApSNMPCommunityReadOnly OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The SNMP Read Only Community. The value if read,
will only show ******."::={ enterpriseApSNMP 1}enterpriseApSNMPCommunityReadWrite OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The SNMP Read Write Community. The value if read,
will only show *****."::={ enterpriseApSNMP 2}enterpriseApSNMPTrapDestinationTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApSNMPTrapDestinationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each trap receiving server."::={ enterpriseApSNMP 3}enterpriseApSNMPTrapDestinationEntry OBJECT-TYPESYNTAX EnterpriseApSNMPTrapDestinationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one trap receiving server."INDEX{ enterpriseApSNMPTrapDestinationIndex }::={ enterpriseApSNMPTrapDestinationTable 1}
EnterpriseApSNMPTrapDestinationEntry ::=SEQUENCE{
enterpriseApSNMPTrapDestinationIndex INTEGER,
enterpriseApSNMPTrapDestinationCommunity DisplayString,
enterpriseApSNMPTrapDestinationIP IpAddress,
enterpriseApSNMPTrapDestinationState INTEGER}enterpriseApSNMPTrapDestinationIndex OBJECT-TYPESYNTAXINTEGER(1..4)MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Index of the Trap Destination Table."::={ enterpriseApSNMPTrapDestinationEntry 1}enterpriseApSNMPTrapDestinationCommunity OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The SNMP Trap Community"::={ enterpriseApSNMPTrapDestinationEntry 2}enterpriseApSNMPTrapDestinationIP OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The IP address of the trap receiving server."::={ enterpriseApSNMPTrapDestinationEntry 3}enterpriseApSNMPTrapDestinationState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the trap receiving server is enabled."::={ enterpriseApSNMPTrapDestinationEntry 4}enterpriseApSNMPTrapFilters OBJECTIDENTIFIER::={ enterpriseApSNMP 4}sysSystemUpTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"This value indicates whether the sysSystemUp trap is enabled."::={ enterpriseApSNMPTrapFilters 1}sysSystemDownTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the sysSystemDowntrap is enabled."::={ enterpriseApSNMPTrapFilters 2}sysRadiusServerChangedTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the sysRadiusServerChanged trap is enabled."::={ enterpriseApSNMPTrapFilters 3}sysConfigFileVersionChangedTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the sysConfigFileVersionChanged trap is enabled."::={ enterpriseApSNMPTrapFilters 4}dot11StationAssociationTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)
}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot11StationAssociation trap is enabled."::={ enterpriseApSNMPTrapFilters 5}dot11StationReAssociationTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot11StationReAssociation trap is enabled."::={ enterpriseApSNMPTrapFilters 6}dot11StationAuthenticationTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot11StationAuthentication trap is enabled."::={ enterpriseApSNMPTrapFilters 7}dot11StationRequestFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot11StationRequestFail trap is enabled."::={ enterpriseApSNMPTrapFilters 8}dot11InterfaceBFailTrapEnabled OBJECT-TYPESYNTAXINTEGER
{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot11InterfaceBFail trap is enabled."::={ enterpriseApSNMPTrapFilters 9}dot11InterfaceAGFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot11InterfaceAGFail trap is enabled."::={ enterpriseApSNMPTrapFilters 10}dot1xMacAddrAuthSuccessTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot1xMacAddrAuthSuccess trap is enabled."::={ enterpriseApSNMPTrapFilters 11}dot1xMacAddrAuthFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot1xMacAddrAuthFail trap is enabled."::={ enterpriseApSNMPTrapFilters 12}
dot1xAuthNotInitiatedTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot1xAuthNotInitiated trap is enabled."::={ enterpriseApSNMPTrapFilters 13}dot1xAuthSuccessTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot1xAuthSuccess trap is enabled."::={ enterpriseApSNMPTrapFilters 14}dot1xAuthFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot1xAuthFail trap is enabled."::={ enterpriseApSNMPTrapFilters 15}localMacAddrAuthSuccessTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"This value indicates whether the localMacAddrAuthSuccess trap is enabled."::={ enterpriseApSNMPTrapFilters 16}localMacAddrAuthFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the localMacAddrAuthFail trap is enabled."::={ enterpriseApSNMPTrapFilters 17}pppLogonFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the pppLogonFail trap is enabled."::={ enterpriseApSNMPTrapFilters 18}iappStationRoamedFromTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the iappStationRoamedFrom trap is enabled."::={ enterpriseApSNMPTrapFilters 19}iappStationRoamedToTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)
}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the iappStationRoamedTo trap is enabled."::={ enterpriseApSNMPTrapFilters 20}iappContextDataSentTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the iappContextDataSent trap is enabled."::={ enterpriseApSNMPTrapFilters 21}sntpServerFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the sntpServerFail trap is enabled."::={ enterpriseApSNMPTrapFilters 22}dot1xSuppAuthenticatedTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the dot1xSupplicantAuthenticated
trap is enabled."::={ enterpriseApSNMPTrapFilters 23}wirelessExternalAntennaTrapEnabled OBJECT-TYPESYNTAXINTEGER
{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the wirelessExternalAntenna
trap is enabled."::={ enterpriseApSNMPTrapFilters 24}micFailTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the MIC failure
trap is enabled."::={ enterpriseApSNMPTrapFilters 25}seqErrTrapEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether the sequence error
trap is enabled."::={ enterpriseApSNMPTrapFilters 26}-- ***************************************************************
-- EAP Wireless Session Table
-- ***************************************************************enterpriseApSessionTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApSessionEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table list all sessions (wireless stations) status"::={ enterpriseApSession 1}
enterpriseApSessionEntry OBJECT-TYPESYNTAX EnterpriseApSessionEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about status and statistics of the wireless station."INDEX{ enterpriseApSessionIfIndex, enterpriseApSessionStationAddres }::={ enterpriseApSessionTable 1}
EnterpriseApSessionEntry ::=SEQUENCE{
enterpriseApSessionIfIndex Integer32,
enterpriseApSessionStationAddres MacAddress,
enterpriseApSessionAuthenticated TruthValue,
enterpriseApSessionAssociated TruthValue,
enterpriseApSessionIsForwarding TruthValue,
enterpriseApSessionKeyType INTEGER,
enterpriseApSessionAssociationId Integer32,
enterpriseApSessionLastAuthenticatedTime TimeTicks,
enterpriseApSessionAssociatedTime TimeTicks,
enterpriseApSessionLastAssociatedTime TimeTicks,
enterpriseApSessionLastDisassociatedTime TimeTicks,
enterpriseApSessionTxPacketCount Counter32,
enterpriseApSessionRxPacketCount Counter32,
enterpriseApSessionTxByteCount Counter32,
enterpriseApSessionRxByteCount Counter32}enterpriseApSessionIfIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Interface index for the radio this session is associated
with."::={ enterpriseApSessionEntry 1}
enterpriseApSessionStationAddres OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique MAC Address of the station for this session."::={ enterpriseApSessionEntry 2}enterpriseApSessionAuthenticated OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Whether the session is authenticated or not."::={ enterpriseApSessionEntry 3}enterpriseApSessionAssociated OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Whether the session is associated or not. It is rare case that
not associated stations show up in the table."::={ enterpriseApSessionEntry 4}enterpriseApSessionIsForwarding OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Whether the AP is forwarding the client station traffic (higher level authentication)"::={ enterpriseApSessionEntry 5}enterpriseApSessionKeyType OBJECT-TYPESYNTAXINTEGER{none(1),staticWep(2),dynamicWep(3),wpaWep(4),wpaTkip(5),wpaAes(6)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The encryption key type used by the station. Note that wpa-wep is not supported"::={ enterpriseApSessionEntry 6}enterpriseApSessionAssociationId OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The internal association identify number"::={ enterpriseApSessionEntry 7}enterpriseApSessionLastAuthenticatedTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the time in hundredths of a second last time the client
is authenticated. Note that a session may be authenticated multiple times.
The value is related to the system startup"::={ enterpriseApSessionEntry 8}enterpriseApSessionAssociatedTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the time in hundredths of a second since the client
associated. The value is related to the system startup"::={ enterpriseApSessionEntry 9}enterpriseApSessionLastAssociatedTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the time in hundredths of a second when the client
associated in last session. The value is related to the system startup"::={ enterpriseApSessionEntry 10}enterpriseApSessionLastDisassociatedTime OBJECT-TYPESYNTAXTimeTicks
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the time in hundredths of a second when the client
disassociated in last session. The value is related to the system startup"::={ enterpriseApSessionEntry 11}enterpriseApSessionTxPacketCount OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of packets transmitted"::={ enterpriseApSessionEntry 12}enterpriseApSessionRxPacketCount OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of packets received"::={ enterpriseApSessionEntry 13}enterpriseApSessionTxByteCount OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of bytes transmitted"::={ enterpriseApSessionEntry 14}enterpriseApSessionRxByteCount OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of bytes received"::={ enterpriseApSessionEntry 15}-- ****************************************************************************************
-- enterpriseApIapp - IAPP Mib elements
-- ****************************************************************************************enterpriseApIappEnabled OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)
}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Whether IAPP is enabled."::={ enterpriseApIapp 1}-- ***************************************************************
-- Event Log Table
-- ***************************************************************enterpriseApEvLogTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApEvLogEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is a snapshot of the current event log."::={ enterpriseApEventLog 1}enterpriseApEvLogEntry OBJECT-TYPESYNTAX EnterpriseApEvLogEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing one message
from the event log."INDEX{ evLogIndex }::={ enterpriseApEvLogTable 1}
EnterpriseApEvLogEntry ::=SEQUENCE{
evLogIndex INTEGER,
evLogMessage DisplayString}evLogIndex OBJECT-TYPESYNTAXINTEGER(1..128)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Index of the Event Log Message"::={ enterpriseApEvLogEntry 1}evLogMessage OBJECT-TYPESYNTAXDisplayString(SIZE(0..256))MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The Event Log Message"::={ enterpriseApEvLogEntry 2}enterpriseApEvLogClear OBJECT-TYPESYNTAXINTEGER{clearLog(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is set to 1 to clear the event log. When read, the value
will have no meaning."::={ enterpriseApEventLog 2}-- **********************************************************************
-- * EnterpriseApVapRadio TABLE
-- **********************************************************************enterpriseApVapRadioTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApVapRadioEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Table of descriptive and status information about
configuration of each Vap radio."::={ enterpriseApVapRadio 1}enterpriseApVapRadioEntry OBJECT-TYPESYNTAX EnterpriseApVapRadioEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the table, containing information
about configuration of one Vap radio of the AP."INDEX{ enterpriseApVapRadioIndex }::={ enterpriseApVapRadioTable 1}
EnterpriseApVapRadioEntry ::=SEQUENCE{
enterpriseApVapRadioIndex Integer32,
enterpriseApVapRadioState INTEGER,
enterpriseApVapRadioClosedSystem INTEGER,
enterpriseApVapRadioMaxAssoc INTEGER,
enterpriseApVapRadioTransmitKey INTEGER,
enterpriseApVapRadioDescription DisplayString,
enterpriseApVapRadioAdminState INTEGER}enterpriseApVapRadioIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Radio Index for configuration."::={ enterpriseApVapRadioEntry 1}enterpriseApVapRadioState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This value indicates the operational state of the radio interface."::={ enterpriseApVapRadioEntry 2}enterpriseApVapRadioClosedSystem OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates whether closed system is enabled for this radio interface."::={ enterpriseApVapRadioEntry 3}enterpriseApVapRadioMaxAssoc OBJECT-TYPESYNTAXINTEGER(1..64)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the max number of clients allowed on this radio interface."::={ enterpriseApVapRadioEntry 4}enterpriseApVapRadioTransmitKey OBJECT-TYPESYNTAXINTEGER(1..4)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates default transmit key in use for this radio interface."::={ enterpriseApVapRadioEntry 5}enterpriseApVapRadioDescription OBJECT-TYPESYNTAXDisplayString(SIZE(0..80))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the description for this radio interface."::={ enterpriseApVapRadioEntry 6}enterpriseApVapRadioAdminState OBJECT-TYPESYNTAXINTEGER{enabled(1),disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value indicates the state of the radio interface admin state."::={ enterpriseApVapRadioEntry 7}-- **********************************************************************
-- * End of EnterpriseApVapRadio TABLE
-- **********************************************************************ENDFOUNDRY-WIRELESS-AP-IDS-MIB DEFINITIONS::=BEGIN-- ****************************************************************************************
-- enterpriseApIds - Intrusion Detection System Mib Elements
-- ****************************************************************************************IMPORTSOBJECT-TYPEFROM SNMPv2-SMI
RowStatus,TruthValue,MacAddressFROM SNMPv2-TC
enterprises
FROM RFC1155-SMI;--iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).foundry(1991).products(1).wirelessAp(6).enterpriseAP(1)
foundry OBJECTIDENTIFIER::={ enterprises 1991}products OBJECTIDENTIFIER::={ foundry 1}wirelessAp OBJECTIDENTIFIER::={ products 6}enterpriseAp OBJECTIDENTIFIER::={ wirelessAp 1}enterpriseApIds OBJECTIDENTIFIER::={ enterpriseAp 100}enterpriseApIdsGlobal OBJECTIDENTIFIER::={ enterpriseApIds 1}enterpriseApIdsTable OBJECTIDENTIFIER::={ enterpriseApIds 2}enterpriseApIdsEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When this is true(1) the AP will enable Intrusion Detection System.
When false(2), the AP will disable Intrusion Detection System."::={ enterpriseApIdsGlobal 1}enterpriseApIdsPermanentBlockIntruderEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When this is true(1) the AP will permanently reject all station
MAC address in enterpriseApIdsStationTable. When false(2), the
AP will recheck in cycle to progressively reject all station
MAC address in enterpriseApIdsStationTable."::={ enterpriseApIdsGlobal 2}enterpriseApIdsBlockTime OBJECT-TYPESYNTAXINTEGER(1..65536)MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"How long to block an intruder MAC address.
Each unit is second."::={ enterpriseApIdsGlobal 3}enterpriseApIdsCycleTime OBJECT-TYPESYNTAXINTEGER(1..65536)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"How long to recheck an intruder MAC address.
Each unit is second."::={ enterpriseApIdsGlobal 4}-- ****************************************************************************************
-- Intrusion Detection System Authentication Table
-- ****************************************************************************************enterpriseApIdsAuthTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApIdsAuthEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Intrusion Detection System Authentication Table."::={ enterpriseApIdsTable 1}enterpriseApIdsAuthEntry OBJECT-TYPESYNTAX EnterpriseApIdsAuthEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry of the Intrusion Detection System Authentication Table."INDEX{ enterpriseApIdsAuthType, enterpriseApIdsAuthCycle }::={ enterpriseApIdsAuthTable 1}
EnterpriseApIdsAuthEntry ::=SEQUENCE{
enterpriseApIdsAuthType INTEGER,
enterpriseApIdsAuthCycle INTEGER,
enterpriseApIdsAuthMaxNumOfAttempts INTEGER,
enterpriseApIdsAuthRowStatus RowStatus}enterpriseApIdsAuthType OBJECT-TYPESYNTAXINTEGER{dot1x(1),preSharedKey(2),
staticKey(3)}MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Authentication method type."::={ enterpriseApIdsAuthEntry 1}enterpriseApIdsAuthCycle OBJECT-TYPESYNTAXINTEGERMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Recheck cycle number."::={ enterpriseApIdsAuthEntry 2}enterpriseApIdsAuthMaxNumOfAttempts OBJECT-TYPESYNTAXINTEGER(1..65536)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Maximum number of attempts to authenticate in each recheck cycle."::={ enterpriseApIdsAuthEntry 3}enterpriseApIdsAuthRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row."::={ enterpriseApIdsAuthEntry 4}-- ****************************************************************************************
-- Intrusion Detection System Station Table
-- ****************************************************************************************enterpriseApIdsStationTable OBJECT-TYPESYNTAXSEQUENCEOF EnterpriseApIdsStationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Intrusion Detection System Station Table."::={ enterpriseApIdsTable 2}enterpriseApIdsStationEntry OBJECT-TYPE
SYNTAX EnterpriseApIdsStationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry of the Intrusion Detection System Station Table."INDEX{ enterpriseApIdsStationMacAddr }::={ enterpriseApIdsStationTable 1}
EnterpriseApIdsStationEntry ::=SEQUENCE{
enterpriseApIdsStationMacAddr MacAddress,
enterpriseApIdsStationRowStatus RowStatus,
enterpriseApIdsStationAuthenticated TruthValue,
enterpriseApIdsStationAssociated TruthValue,
enterpriseApIdsStationForwarding TruthValue,
enterpriseApIdsStationLastKeyType INTEGER,
enterpriseApIdsStationManualBlock TruthValue,
enterpriseApIdsStationDynamicBlock TruthValue,
enterpriseApIdsStationAttemptsConsumed INTEGER,
enterpriseApIdsStationAttemptsRemained INTEGER,
enterpriseApIdsStationRemainedCycleTime INTEGER,
enterpriseApIdsStationRemainedBlockTime INTEGER,
enterpriseApIdsStationCycle INTEGER,
enterpriseApIdsStationPermBlock TruthValue}enterpriseApIdsStationMacAddr OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Station MAC address rejected by the AP."::={ enterpriseApIdsStationEntry 1}enterpriseApIdsStationRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row."::={ enterpriseApIdsStationEntry 2}enterpriseApIdsStationAuthenticated OBJECT-TYPESYNTAXTruthValue
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Station authenticate status."::={ enterpriseApIdsStationEntry 3}enterpriseApIdsStationAssociated OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Station associate status."::={ enterpriseApIdsStationEntry 4}enterpriseApIdsStationForwarding OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Station forwarding status."::={ enterpriseApIdsStationEntry 5}enterpriseApIdsStationLastKeyType OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION""::={ enterpriseApIdsStationEntry 6}enterpriseApIdsStationManualBlock OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Station was manually blocked."::={ enterpriseApIdsStationEntry 7}enterpriseApIdsStationDynamicBlock OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Station was dynamically blocked."::={ enterpriseApIdsStationEntry 8}enterpriseApIdsStationAttemptsConsumed OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-only
STATUScurrentDESCRIPTION"Number of login attempts consumed in current cycle."::={ enterpriseApIdsStationEntry 9}enterpriseApIdsStationAttemptsRemained OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of login attempts remained in current cycle."::={ enterpriseApIdsStationEntry 10}enterpriseApIdsStationRemainedCycleTime OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Remaining last cycle time in seconds."::={ enterpriseApIdsStationEntry 11}enterpriseApIdsStationRemainedBlockTime OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Remaining block time in seconds after last cycle."::={ enterpriseApIdsStationEntry 12}enterpriseApIdsStationCycle OBJECT-TYPESYNTAXINTEGERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Current cycle number."::={ enterpriseApIdsStationEntry 13}enterpriseApIdsStationPermBlock OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Station was Permanently blocked."::={ enterpriseApIdsStationEntry 14}END